Panel meter with performance features as follows:
•
adjustable input amplification for 1 mV/V, 2 mV/V or 3.3mV/V sensors
•
10 V integrated bridge supply for standard 350 ohm measuring bridges
•
permanent wire-breach monitoring
•
bipolar input range for compression and tensile forces
•
integrated factory calibration for pre-calibrated weighing cells
•
auto-sensor recognition for 1 mV/V, 2 mV/V and 3.3 mV/V
•
measuring rate up to 50 measurements (measuring time adjustable from 0.02 to 10.000 sec)
•
24 bit transducer resolution, of which up to 19 bits (500,000 / 0.0002 % of measuring range),
are noise-free!
•
high long-term and temperature stability
•
5-digit digital display with range from -9999 to 99999 digits
•
free scaling and setting of decimal point
•
alignment of a sensor with up to 30 additional calibration points
•
tare function for manual and automatic control
•
fully automatic or semi-automatic calibration functions
•
min/max-value recording, can be called up or shown permanently in the display
•
integrated conversion function with adjustable factor
•
complex parameter and access security via several user levels with event counter
User manual for
IPM5
/
IPW5
-devices
Digital processor-controlled indication instrument for strain gauge measurement:
suitable for 4-
or 6-wire measuring bridges (1.1mV/V; 2mV/V; 3.3mV/V; 6mV/V)
