5. Setting up the device
14
Menu level
Parameterisation level
User code
Default:
Via this code, reduced sets of parameters can be released. A change of the
can be done
via the correct input of the
(master code).
Master code,
:
Default:
By entering
, the device will be unlocked and all parameters are released.
Release/lock analog output parameters,
Default:
Analog output parameters can be locked or released for the user:
-
the initial or final value can be changed in operation mode
-
the output signal can be changed from e.g. 0-20 mA to 4-20 mA or 0-10 VDC
-
analog output parameters are released
-
all analog output parameters are locked
Release/lock alarm parameters,
Default:
This parameter describes the user release/user lock of the alarm:
: here only the range of value of the threshold values 1-4 can be changed
-
: here the range of value and the alarm trigger can be changed
-
all alarm parameters are released
-
all alarm parameters are locked
Menu group level
5.4.3. Safety parameters
Menu level