5. Setting up the device
13
Menu level
Parameterisation level
Brightness control,
:
Default:
The brightness of the display can be adjusted in 16 levels from 00 = very dark to 15 = very
bright via this parameter or alternatively via the navigation keys from the outside. During the
start of the device the level that is deposited under this parameter will always be used, even
though the brightness has been changed via the navigation keys in the meantime.
Display flashing,
Default:
A display flashing can be added as additional alarm function either to single or to a combination
of off-limit condition. With
, no flashing is allocated.
Assignment (deposit) of key functions,
Default:
For the operation mode, special functions can be deposited on the navigation keys
[
▲
] [
▼
]
, in
particular this function is made for devices in housing size 48x24mm which do not have a 4th
key (
[O]
-key). If the min/max-memory is activated with
, all measured min/max-values are
saved during operation and can be recalled via the navigation keys. The values get lost by
restart of the device. If the threshold value correction
or
is choosen, the values of the
threshold can be changed during operation without disturbing the operating procedure. If
is
selected, the navigation keys are without function in the operation mode.
Back to menu group level,
:
With
[P]
the selection is confirmed and the device changes into menu group level
.
