6. Reset to factory settings
23
Menu level
Parameterisation level
Back to menu group level,
:
With
[P]
the selection is confirmed and the device changes into menu group level
.
The same applies to
to
.
Menu-group level
Programming interlock:
Description see page 10, menu-level
To return the unit to a
defined basic state
, a reset can be carried out to the default values.
The following procedure should be used:
• Switch off the power supply
• Press button [
P
]
• Switch on voltage supply and press
[P]-
button until
is shown in the display.
With reset, the default values of the program table are loaded and used for subsequent
operation. This sets the unit back to the state in which it was supplied.
Caution! All application-related data are lost.
6. Reset to factory settings