5. Setting up the device
21
Menu level
Parameterisation level
Alarms for relay 2,
Default:
The allocation of the alarms to relay 1 happens via this parameter, one alarm or a
group of alarms can be chosen. This parameter can only be selected if
was
selected under
. With
[P]
the selection is confirmed and the device changes
into menu level.
Back to menu group level,
With
[P]
the selection is confirmed and the device changes into menu group level
.
….
Menu group level
5.4.6. Alarm parameters
Menu level
Menu level
Parameterisation level
Depedency of alarm 1,
Default:
The dependency of alarm 1 can be related to special functions, in detail these are
the current measurand, the min-value or the max-value.
causes the
dependency either by pressing the
[O]
-key on the front of the housing or by an
external signal via the digital input. With
[P]
the selection is confirmed and the
device changes into menu level.
Example:
By using the maximum value
=
in combination with a threshold
monitoring
, an alarm confirmation can be realised. Use the navigation
keys or the fourth key for confirmation.