![background image](http://html1.mh-extra.com/html/ics/im2/im2_user-manual_3525523021.webp)
5. Setting up the device
18
Menu level
Parameterisation level
Overflow behavior,
Default:
To recognise and evaluate faulty signals, e.g. by a controller, the overflow
behavior of the analog output can be defined. As overflow can be seen either
,
that means the analog output runs on the set limits e.g. 4 mA and 20 mA, or
(input value smaller than initial value, analog output changes on e.g. 4 mA),
(higher than final value, analog output changes on e.g. 20 mA). If
or
is
set, the analog output changes on the smallest or highest possible binary value.
This means that values of e.g. 0 mA, 0 VDC or values higher than 20 mA or 10
VDC can be reached. With
[P]
the selection is confirmed and the device changes
into menu level.
Back to menu group level,
With
[P]
the selection is confirmed and the device changes into menu group level
.