10
5. Setting up the device
Menu level
Parameterisation level
Master code (4-digit number-combination free available),
:
Default:
After
has been activated under menu item
, this code can be used for
unlocking all parameters. By pressing
[P]
for approx. 3 seconds in operation
mode, the message
is shown in the display and offer the user access to all
parameters by entering
. While leaving this parameterisation it can be
unlocked permanently under
by selecting
or
. So, at an anew
pressing of
[P]
in operating mode, an anew entereing of the code is not needed.
5.3. Programming interlock
Activation / Deactivation of the programming interlock or completion of the
standard parameterisation with change into menu group level (complete
function volume),
Default:
Choose between the deactivated key lock
(works setting), the activated key
lock
, or the menu group level
with the navigation keys
[▲] [▼]
. Confirm
the selection with
[P]
. After this, the display confirms the settings with
"
"
and
automatically switches into operating mode. If
was selected, the keyboard is
locked. To get back into the menu level, press
[P]
for 3 seconds in operating
mode. Now enter the
(works setting
) that appears using
[▲] [▼]
plus
[P]
to unlock the keyboard.
appears if the input is wrong.
To parameterise further functions,
needs to be set. The device confirms this
setting with
„
„
and changes automatically into operation mode. By pressing
[P]
for approx. 3 seconds in operation mode, the first menu group
is shown in
the display and thus confirms the change into the extended parameterisation. It
stays as long activated as
is entered in menu group
, thus the display is
set back in standard parameterisation again.