© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
56
16.4 Using pliers, hold saw up by magnet
counterweight.
16.5 Strike flywheel removal tool with
a ball peen hammer. The flywheel
should release from crankshaft.
16.6 Inspect and clean flywheel. Replace
if any of the fins are broken.
16.7 Inspect cast woodruff key inside
the flywheel.
NOTE:
Key is cast into flywheel.
16.8 Install flywheel, plain washer, wave
washer, and flywheel nut.
A Torque nut to 217 in-lbs. (24.5 Nm).
16. FLYWHEEL
