![background image](http://html1.mh-extra.com/html/ics/660gc/660gc_service-manual_3535814051.webp)
© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
50
13.23 Install rear manifold.
A Apply lightweight grease on the
inside lip of the rear manifold.
B Push rear manifold onto
cylinder intake.
C Align mold seams of intake boot with
casting seams of the cylinder.
13.24 Install rear manifold clamp.
A Torque to 11 in-lbs. (1 Nm).
NOTE:
Insure that the intake boot is
properly installed.
DO NOT OVER TIGHTEN
INTAKE BOOT CLAMP.
If over tightened, intake boot can
tear, resulting in an air leak which
will cause engine damage.
13.25 Install the pulse tube onto
cylinder barb.
13.26 Install protective spring onto
pulse tube.
13. CYLINDER & PISTON