© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
53
15
This section covers the removal,
inspection, and installation of
the ignition coil. Removal of
the starter is required. Refer to
section 8 if necessary.
15.1 Remove starter flywheel shroud by
unhooking wires.
15.2 Remove ignition coil screws, wave
washers and plain washers.
15.3 Remove ignition coil.
15.4 Inspect ignition coil.
A Look for:
• Cracks
• Missing insulation
• Wear marks in wire
B Clean flywheel magnets and
coil if rusty.
15. IGNITION COIL