![background image](http://html1.mh-extra.com/html/ics/660gc/660gc_service-manual_3535814028.webp)
© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
27
8. STARTER
8
This section covers the
removal of the starter cover,
replacement of the starter rope,
and replacement of the
recoil spring.
8.1
Remove starter cover screws (4).
8.2 Remove starter cover assembly
from saw.
8.3
Remove starter cord shield screws.
8.4
Relieve spring tension.
A Pull 4-6” (10-15 cm) of rope out.
B Line rope up with notch on pulley.
C To release pulley, slowly rotate
pulley counterclockwise until spring
pressure is released. Use thumb
as a brake.
8.5
Remove rubber screw seal.