© 2011 ICS | Blount, Inc. Specifications and pricing are subject to change without notice. P/N 550416 REV06012011
660GC SERVICE MANUAL
55
16
This section covers the removal,
inspection, and installation of
the flywheel. Removal of spark
plug and the starter is required.
Refer to sections 6 and 8
if necessary.
16.1 Insert piston stop.
16.2 Remove flywheel nut, wave washer,
and plain washer.
16.3 Screw on flywheel removal tool finger
tight. Unscrew tool 1 ½ turns leaving
approximately 1/8 inch (4 mm) space
between tool and flywheel.
16. FLYWHEEL