Copyright © May 24, 2006 ICS, Blount Inc.
603GC SHOP MANUAL
55
16
This section covers the removal,
inspection, and installation of
the flywheel. Removal of spark
plug and the starter is required.
Refer to sections 6 and 8
if necessary.
6. Insert piston stop.
6.2 Remove flywheel nut, wave washer,
and plain washer.
6.3 Screw on flywheel removal tool finger
tight. Unscrew tool ½ turns leaving
approximately /8 inch (5 mm) space
between tool and flywheel.
16. FLYWHEEL
Summary of Contents for 603GC
Page 1: ...603GC Gas Utility Saw Shop Manual...
Page 2: ......
Page 84: ...603GC SHOP MANUAL 82 Copyright May 24 2006 ICS Blount Inc...