Copyright © May 24, 2006 ICS, Blount Inc.
TITLE
603GC SHOP MANUAL
35
10. CYLINDER COVER
10
This section covers the
disassembly and assembly of
the cylinder cover. Removal of
the air intake components and
front handle is necessary. Refer
to sections 5 and 7 if needed.
0. Remove the air filter mount screws.
NOTE:
May require heat to
remove screws.
0.2 Remove the cylinder cover screws (3).
0.3 Remove spark plug boot from cylinder
cover taking care not to pry or
damage the wire.
0.4 Remove fuel tank breather cap
and clamp.
0.5 Partially remove intake manifold
from cylinder cover.
0.6 Remove cylinder cover.
A Pull up on front.
B Push intake manifold through hole.
C Make sure throttle linkage is
disengaged from cylinder cover.
D Guide fuel breather tube and
compensator tube through
cylinder cover.
Summary of Contents for 603GC
Page 1: ...603GC Gas Utility Saw Shop Manual...
Page 2: ......
Page 84: ...603GC SHOP MANUAL 82 Copyright May 24 2006 ICS Blount Inc...
