![background image](http://html2.mh-extra.com/html/ics/603gc/603gc_shop-manual_3521262033.webp)
Copyright © May 24, 2006 ICS, Blount Inc.
TITLE
603GC SHOP MANUAL
3
8. STARTER
8.7 Remove starter pawl screws, pawls,
spring, and plain washer.
8.8 Inspect and clean pawl components.
A Inspect the components.
Replace if necessary.
B Clean the components with a brush
and solvent.
8.9 Assemble components.
A Make sure the spring is in the
correct position.
B Use Loctite
®
242 on the pawl screws.
C Torque to 60 in-lbs. (6.8 Nm).
8.20 Install starter cover.
A Pull out cord 4-6”.
B Slowly release while placing cover
to allow pawls to engage.
Summary of Contents for 603GC
Page 1: ...603GC Gas Utility Saw Shop Manual...
Page 2: ......
Page 84: ...603GC SHOP MANUAL 82 Copyright May 24 2006 ICS Blount Inc...