![background image](http://html2.mh-extra.com/html/ics/603gc/603gc_shop-manual_3521262055.webp)
Copyright © May 24, 2006 ICS, Blount Inc.
603GC SHOP MANUAL
53
15
This section covers the removal,
inspection, and installation of
the ignition coil. Removal of
the starter is required. Refer to
section 8 if necessary.
5. Remove starter flywheel shroud by
unhooking wires.
5.2 Remove ignition coil screws, wave
washers and plain washers.
5.3 Remove ignition coil.
5.4 Inspect ignition coil.
A Look for:
• Cracks
• Missing insulation
• Wear marks in wire
B Clean flywheel magnets and
coil if rusty.
15. IGNITION COIL
Summary of Contents for 603GC
Page 1: ...603GC Gas Utility Saw Shop Manual...
Page 2: ......
Page 84: ...603GC SHOP MANUAL 82 Copyright May 24 2006 ICS Blount Inc...