ICP ROCKY 3703EVR, User Manual

Page: 7 / 39

11
2.5 DiskOnChip™ Flash Disk (JP9)
The DiskOnChip™ Flash Disk Chip(DOC) is produced by M-
Systems. Because the DOC is 100% software compatible to
hard disk and DOS, users don‘t need any extra software utility. It
is just “plug and play” easy and reliable. At present the DOC is
available from 2MB to 144MB. The DiskOnChip only shares
8KB memory address.
• JP9 : DiskOnChip Memory Address Setting
Address 1-2 3-4 5-6
CE000 – CFFFF OFF ON ON
D6000 – D7FFF ON OFF ON
DE000 – DFFFF OFF OFF ON
2.6 Clear CMOS Setup (JBAT1)
If want to clear the CMOS Setup (for example forgot the
password you should clear the setup and then set the password
again.), you should close the JBAT1 (1-2) about 3 seconds,
then open it again. Set back to normal operation mode, open
JP1.
• JBAT1 : Clear CMOS Setup (Reserve Function)
JBAT1 DESCRIPTION
1-2 Normal Operation
2-3 Clear CMOS Setup
2.7 Onboard LAN1(JP7) / LAN2(JP10) Setting
The onboard LAN controllers can be disabled if you don’t want to use
then. All the hardware resource will be released. After they are disabled.
JP7/JP10 DESCRIPTION
CLOSE Enable
OPEN Disable
12
3
Connection
This chapter describes how to connect peripherals, switches
and indicators to the ROCKY- 3703EVR board.
Table of Connectors
LABEL FUNCTION
CN1 CPU Fan Connector
CN2,CN3 Serial Port 10-pin Connector
CN4 Parallel Port Connector
CN5 Primary IDE Connector
CN6 Secondary IDE Connector
CN7 FDC Connector
CN8,CN9 Promise IDE RAID Connector
CN10 Promise IDE RAID Active LED Connector
CN12 AUDIO LINE-IN
CN13 AUDIO CD-IN
CN14 AUDIO MIC-IN
CN15 VGA 15-pin Female Connector
CN16 ATX 20-PIN Power Connector
CN18,CN19 LAN State LED Connector
CN21,CN27 LAN RJ45 Connector
CN22 System Fan Connector
CN23,CN25 USB Connector
CN24 IrDA connector
CN26 External 5-pin Header Keyboard Connector
CN28 PS/2 MOUSE & KEYBOARD Connector
CN29 ATX BUTTON (Power ON) Switch
CN30 Backplane to Mainboard Connector
CN31 External Switches and Indicators