69
6. Once “Y” is selected, the following progress screen will appear. The
process will take a few minutes.
Please Wait While Duplicating The Image
10% Complete
7. Once mirroring is complete, the following screen will appear
confirming that your Security array has been created. Press any key
to reboot the system
Array has been created.
<Press Any Key to Reboot>
70
Making a FastTrak100 Disk Array Bootable
WARNING
: In order for you to boot from an array on the
FastTrak100, your PC or server must be configured in the
CMOS Setup to use the FastTrak100 as a bootable device
(versus the onboard controller or another add-in card). This option is not
available if the FastTrak100 is being used as a secondary controller.
1. Once you have returned to the Define Array Menu window (below),
you will see the array(s) you have created. You now may use the
menu to select which previously defined array will be used as the
bootable array.
FastBuild (tm) Utility 1.xx DELL (c) 1995-2000 Promise Technology, Inc.
[ Define Array Menu ]
Array No RAID Mode Total Drv Capacity(MB) Status
* Array 1 Stripe 2 13044 Functional
Note: * — Bootable Array
[
↑
] Up [
↓
] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive
2. Highlight the array which you want to boot from using the [
↑
] Up [
↓
]
Down keys.
3. Press the [Space] bar key.
4. An * asterisk will appear next to the array number indicating it as
bootable. The system will now recognize this array as the first array
seen
5. The system will then use this bootable array as the (fixed) boot C:
drive.
NOTE
: The bootable array must contain your configured
operating system.
