59
page 68.
To delete an array (but not delete the data contained on the array),
select “Deleting An Array” on page 77.
To rebuild a mirrored array, see “Rebuilding an Array” on page 79.
To view controller settings, see “Viewing Controller Configuration” on
page 81
NOTE
: After installing the FastTrak100 card and
configuring an array using FastBuild, you
s
hould
FDISK and format the arrayed drive(s) if you are using
new, blank drives. Depending on the type of array you
are using.
60
Creating Arrays Automatically
The Auto Setup <1> selection from the Main Menu can
intuitively help create your disk array. It will assign all available
drives appropriate for the disk array you are creating. After
making all selections, use Ctrl-Y to save selections. FastBuild
will automatically build the array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[
Auto Setup Options Menu
]
...................................................................................................
Optimize Array for: Performance
Typical Application usage: A/V Editing
[ Auto Setup Configuration ]
Mode.................................................... Stripe
Spare Drive Count .......................................1
Drives used in Array.....................................2
Array
Disk
Capacity .............................16126
[ Keys Available ]
[
↑
] Up [
↓
] Down [
←
,
→
, Space] Change Option [ESC] Exit [Ctrl-Y] Save
Optimize Array For
Select whether you want Performance (RAID 0), Security (RAID 1 or
RAID 0+1), or Capacity (Spanning) under the “Optimize Array for” setting.
Performance (RAID 0 Striping)
Supports the maximum performance. The storage capacity equals
the number of drives times the capacity of the smallest drive in the
disk array.
NOTE:
FastTrak100 permits striped arrays using 1, 2, 3, or 4 drives
