Touch Panel Monitor User Manual
,
version 1.1.0,
Last Revised: December 2015
Page: 58
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.2.1.1. Installation for XP-8000-CE6
The following procedure describes how to install the PenMount USB touch driver.
1.
Copy the driver from the CD-ROM to the XP-8000-CE6.
The
“PenMount_USB_TOUCH_Vxx_yyyymmdd_XPAC_CE6.CAB” driver file
can be obtained from:
[name]
Driver path
TP-2070/TP-3080/
TPM-4100_TP-4100/
TP-5120/TP-6150//TP-7170
CD:\[name]\Driver\WinCE\V6.0\XP-8000-CE6 device\
For example:
CD:\TP-2070\Driver\WinCE\V6.0\XP-8000-CE6 device\
Or go to the
“\System_Disk\External_device_driver” folder on the XP-8000-CE6.
2.
Double-click the
“
PenMount_USB_TOUCH_Vxx_yyyymmdd_XPAC_CE6.CAB
” file.
Tips & Warnings
The driver (*.cab) file can only be used once. If you attempt to use it to
install driver a second time, a warning dialog with a message similar to
“<FileName>
is not a valid Windows CE Setup file
” will be displayed
advising that the setup has failed. Please re-download a new (*.cab) file
to use.
3.
Depending on the type of CPU, one of two dialog windows will be displayed.
Click the
“OK” button to continue with the installation.
