ICP DAS USA SmartView TP-2070 User Manual Download Page 32

Page: 32 / 118

Touch Panel Monitor User Manual

version 1.1.0,

Last Revised: December 2015

Page: 32



E-mail: [email protected]

1.6. System Setup

This section gives details regarding system configuration and adjustment and
mounting options.

1.6.1. System Configuration

There are two kinds of OSD menu in the following description.

TP-2070/TP-4100/TPM-4100

support the following OSD menu.

OSD Menu Functions

Control

Description

Contrast

Adjusts the contrast of the monitor

Brightness

Adjusts the brightness of the monitor

Image setting

Auto config

Press

to adjust automatically

Phase

Increase or decrease phase value.

Clock

Increase or decrease pixel clock value

Control Function

Adjust V-Position, H-Position,
Clock and Clock and Clock-Phase

Turns OSD main menu on or off

Selects adjustment item

Selects adjustment item counter-clockwise

Decreases the value of the adjustment item

1. Increases the value of the adjustment item
2. Enter the adjustment item

Summary of Contents for SmartView TP-2070









































































































Search results

Summary of Contents for SmartView TP-2070

Reviews:

ICP DAS USA SmartView TP-2070, User Manual, Page: 32 / 118

Search results

Summary of Contents for SmartView TP-2070

Reviews: