Ethernet I/O Modules
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 76
Step 4: Configure the I/O Pair connection on the tPET-PD2POR2 #2 module
1.
In the eSearch Utility, select
tPET-PD2POR2 #2 module
and then click the “
Web
” button to launch
the browser program and connect to the web server.
2.
Enter the password in the Login password field
(the default password is “Admin”)
, and then click
the
“Submit”
button to display the configuration page.
3.
Click the
“Pair
” tab to display the I/O Pair-connection Settings page.
Refer to
Figures 5-1.3
to
5-1.4
for illustrations of how to perform the above procedure.
4. In the “I/O Pair-connection Settings”, select
“PUSH”
from the “
Mode
” drop-down options.
5. Enter the
IP address for tPET-P2POR2 #1 module
in the “
Remote IP
” field.
6. Enter the
TCP Port for tPET-P2POR2 #1 module
in the “
Remote Port
” field.
7. Enter a
DI Count Value for tPET-PD2POR2 #2 module
in the “
DI Count
” field (Local DI to Remote
DO).
For example, enter
“1”
in the
“DI Count”
field. This means
DI x1 of tPET-PD2POR2 #2 module
is
mapped to
DO1 x of tPET-P2POR2 #1 module
.
8. Select
Modbus protocol (e.g., “TCP”)
from the
“TCP/UDP”
drop-down options.
9. Click the “
Submit
” button to complete the configuration.
Figure 5-2.4
