Ethernet I/O Modules
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 49
The following table provides an overview of the parameters contained in the
IP Address configuration
section:
Item
Description
Address Type
Static IP:
If there is no DHCP server installed in your network, you can configure
the network settings manually. Refer to
Section “Manual Configuration”
for
more details.
DHCP:
Dynamic Host Configuration Protocol (DHCP) is a network application
protocol that automatically assigns an IP address to each device. Refer to
Section “Dynamic Configuration”
for more details.
Static IP Address
Each PETL/tET/tPET module connected to the network must have its own
unique IP address. This parameter is used to assign a specific IP address.
Subnet Mask
This parameter is used to assign the subnet mask for the PETL/tET/tPET module.
The subnet mask indicates which portion of the IP address is used to identify
the local network or subnet.
Default Gateway
This parameter is used to assign the IP Address of the Gateway to be used by
the PETL/tET/tPET module. A Gateway (or router) is a device that is used to
connect an individual network to one or more additional networks.
MAC Address
This parameter is used to set the User-defined MAC address, which must be in
the format FF-FF-FF-FF-FF-FF.
Modbus TCP Slave
Local Modbus TCP port
This parameter is used to set the local port to be used by the Modbus slave
device. The default value is 502.
Local Modbus Net ID
This parameter is used to set the Network ID to be used by the Modbus slave
device. The default value is 1.
Update Settings
Click this button to save the revised settings to the PETL/tET/tPET module.
