Ethernet I/O Modules
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 65
DO Addr
For
“POLL”
mode, this parameter specifies the base address of the
Local DO register
that will be mapped to the
Remote DI device
. The
range depends on the type of the ET-2200 module being used.
For
“PUSH”
mode, this parameter specifies the base address of the
Remote DO device
that will be mapped to the
Local DI register
. The
range depends on the type of remote device being used.
0
TCP/UDP
This parameter is used to set the type of Modbus protocol to be used
and can be either TCP or UDP
for the “PUSH” mode only
.
TCP
Submit
Click this button to save the revised settings to PETL/tET/tPET module.
