Ethernet I/O Modules
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 52
Restore Factory Defaults
Restore all options to their factory default states
To reset all parameters to their original factory default settings, use the following procedure:
Step 1
: Click the
“Restore Defaults”
button to reset the configuration.
Step 2
: Click the
“OK”
button in the message dialog box.
Step 3
: Check whether the module has been reset to the original factory default settings for use with
the eSearch Utility. Refer to
Section 3.4 Using the eSearch Utility to assign a new IP”
.
The following table provides an overview of the factory default settings:
Factory Default Settings
IP Address
192.168.255.1
Gateway Address
192.168.0.1
Subnet Mask
255.255.0.0
