Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
8
iP
-8000
-M
RT
U
Quic
k S
ta
rt
Guide
Step4: Select the
Enable Mode
to
Modbus/RTU Slave, and set the
Modbus Timeout
,
Baud Rate
,
Data
Bits
,
Parity
and
Stop Bits
.
Step5: Click the
Set
button to
apply for new settings.
3.How do I reset the COM Port to the default value?
Step1: Go to 7-seg LED, press the
MODE
and
SET
buttons simultaneously for
about 2 seconds.
Step2: Wait for 2 seconds, the word “RESET” appeared.
Press the buttons until the LED is flickering, and
then the COM Ports are
all
set to default values.
The default COM Port values are 115200, N, 8, 1,
RTU Mode.
Aese7
