M-7084 User Manual, Rev. A1.3 7PH-013-A13
37
2.4 $AA0N
Description:
Reads the low pass filter time of channel N.
Syntax:
$AA0N[CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be set (00 to FF)
0
Command to read the low pass filter time of a
channel
N
Specifies the channel to be read (0 ~ 7)
Response:
Valid command:
!AA(Data)[CHKSUM](CR)
Invalid command:
?AA[CHKSUM](CR)
!
Delimiter character for a valid command
?
Delimiter character for an invalid command
AA
Address of the responding module (00 to FF)
(Data)
Low pass filter time is micro seconds, consisting of
5 decimal digits in the range 00001 ~ 32767.
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
