M-7084 User Manual, Rev. A1.3 7PH-013-A13
45
2.8 $AA3N(Data)
Description:
Sets the maximum counter value of a channel.
Syntax:
$AA3N(Data)[CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be set (00 to FF)
3
Command to set the maximum counter value of a
channel
N
Specifies the channel to be read (0 ~ 7)
(Data)
The maximum counter value in eight hexadecimal
digits
Response:
Valid command:
!AA(Data)[CHKSUM](CR)
Invalid command:
?AA[CHKSUM](CR)
!
Delimiter character for a valid command
?
Delimiter character for an invalid command
AA
Address of the responding module (00 to FF)
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
