M-7084 User Manual, Rev. A1.3 7PH-013-A13
83
2.28 @AAFH
Description:
Reads the high frequency mode status of each channel.
Syntax:
@AAFH[CHKSUM](CR)
@
Delimiter character
AA
Address of the module to be read (00 to FF)
FH
Command to read the high frequency mode status
Response:
Valid Command:
!AAVV[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character for a valid command
?
Delimiter character for an invalid command
AA
Address of the responding module (00 to FF)
VV
A two-digit hexadecimal value, where bit 0
corresponds to channel 0, bit 1 corresponds to
channel 1, etc. When the bit is 1 it means that the
high frequency mode is enabled for the channel and
0 means that the high frequency mode is disabled
for the channel.
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
