M-7084 User Manual, Rev. A1.3 7PH-013-A13
53
2.12 $AA5VV
Description:
Specifies the channel(s) to count.
Syntax:
$AA5VV(VV)[CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be set (00 to FF)
5
Command to start counting
VV
A two-digit hexadecimal value, where bit 0
corresponds to channel 0, bit 1 corresponds to
channel 1, etc. When the bit is 1 it means that the
channel is counting and 0 means that the channel is
not counting.
Response:
Valid Response:
!AA[CHKSUM](CR)
Invalid Response:
?AA[CHKSUM](CR)
!
Delimiter character for a valid response
?
Delimiter character for an invalid response. An
invalid command is returned if an attempt is made
to enable a channel that is not present.
AA
Address of the responding module (00 to FF)
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
