ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-47 -
The table describes the parameters contained in the "
IP Address Configuration
" section.
Item
Description
Address Type
Static IP:
If there is no DHCP server installed in your network, you can
configure the network settings manually. Refer to
for more details.
DHCP:
Dynamic Host Configuration Protocol (DHCP) is a network
application protocol that automatically assigns an IP address to each
device. Refer to
Section “Dynamic Configuration”
for more details.
Static IP Address
Each ET-2200 module connected to the network must have its own
unique IP address. This parameter is used to assign a specific IP
address.
Subnet Mask
This parameter is used to assign the subnet mask for the ET-2200
module. The subnet mask indicates which portion of the IP address is
used to identify the local network or subnet.
Default Gateway
This parameter is used to assign the IP Address of the Gateway to be
used by the ET-2200 module. A Gateway (or router) is a device that is
used to connect an individual network to one or more additional
networks.
MAC Address
This parameter is used to set the User-defined MAC address, which
must be in the format FF-FF-FF-FF-FF-FF.
Modbus TCP Slave
Local Modbus TCP port
This parameter is used to set the local port to be used by the Modbus
slave device. The default value is 502.
Local Modbus NetID
This parameter is used to set the Network ID to be used by the
Modbus slave device. The default value is 1.
Update Settings
Click this button to save the revised settings to the ET-2200 module.
