ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-48 -
Dynamic Configuration
Dynamic configuration is very easy to perform. If a DHCP server is connected to you network, a
network address can be dynamically configured by using the following procedure:
Step 1:
Select “
DHCP
” from the Address Type drop-down menu.
Step 2
: Click the
“Update Settings”
button to complete the configuration.
Manual Configuration
When using manual configuration, the network settings should be assigned as follows:
Step 1:
Select
“Static IP”
from the
Address Type
drop-down menu.
Step 2:
Enter the relevant details in the respective
network settings
fields.
Step 3:
Click the
“Update Settings”
button to complete the configuration.
