Product Overview
6
Front Panel
The Icotera i6800 front panel, shown in the following figure, contains the power port, on/off switch,
reset button, connectors and LAN status LEDs. All these items are described in subsequent
topics of this section.
Figure 1. The Icotera i6800 front panel
Status LEDs
There are two types of the Icotera i6800 status LEDs: LAN port LEDs and the LEDs on the LED
panel that is located between LAN and POTS ports.
Figure 2. The Icotera i6800 status LEDs
LAN Port LEDs
LED Panel
Link
Status
Link
Activity
WAN
1
2
WiFi
CATV
The following table shows the status LEDs descriptions for the Icotera i6800.
Table 1. The Icotera i6800 status LEDs descriptions
LED Type
Type
Colour State
Description
On
Communications link established
Blinking
Network activity on the corresponding port
Link Activity
LAN port
activity
Green
Off
Bad connection no connection to this port
On
Corresponding port linked and operating at 1 Gb/s
Link Status
LAN port
status
Yellow
Off
Corresponding port set to operate at 10/100 Mb/s
N/A
Off
Power down
Blinking fast
Obtaining IP address
Blinking slow
Auto detection
Green
Solid
IP connection established
Blinking slow
Management or other interface lease fail (depends on
LEDs configuration)
WAN
WAN port
activity
Red
Solid
No signal
N/A
Off
Line disabled
Blinking fast
Call in progress
Blinking slow
Off-hook
Green
Solid
Line registered
1
/
2
VoIP
registration
status/Hook
status
Red
Solid
Line registration error
