Configuring and managing the i6800
23
Using network diagnostic tools
The Diagnostic menu contains Ping, Traceroute, Wi-Fi scan, and Reset options, which can
be used to troubleshoot connection problems and to reboot the i6800.
Ping option
To use the network Ping tool, complete the following steps:
1.
Click the Ping submenu in the Diagnostic menu to open the Ping section.
Figure 16. Ping section of the Diagnostic menu
2.
In the Ping address field enter the IPv4 address to be pinged. Check the Use predef. val
checkbox, if you want to use the default ping parameters (64 data bytes and 10 packets). If
the Use predef. val. box is unchecked, you can specify custom ping parameters: data size
in bytes in the Packet size field and the number of packets in the Packet count field.
3.
Click the Ping button to send the ping packets to the specified address. The output of the
Ping operation will be displayed continuously in the Results field. To interrupt the running
Ping operation, click the Stop button.
Traceroute option
To use the network Traceroute tool, complete the following steps:
1.
Click the Traceroute submenu in the Diagnostic menu to open the Traceroute section.
2.
Enter the destination host address in the Address field. Click the Diag button to start
tracing route to the entered host. The output of the Traceroute operation will be displayed
continuously in the Results field. To interrupt the running Traceroute operation, click the
Stop button.
