Configuring and managing the i6800
21
Figure 14. The WPS section
Access lists
Each access list provides an Ethernet layer 2 filter, which can be used either to allow or to deny
particular users to connect based on their Wi-Fi adapters MAC address. In order to configure the
Access list for your interfaces, complete the following steps:
1.
Click the Wi-Fi 802.11b/g/n or Wi-Fi 802.11ac submenu of the Settings menu to open the
Wi-Fi settings section.
2.
Go to the ACL settings area which contains the access list for AP.
Figure 15. Access list settings
