Iconix IC215S-R User Manual Download Page 4 | Manualshive

Page: 4 / 68

background image

INTRODUCTION

Congratulations on your purchase of a Renkus-Heinz RHAON Empowered digitally steered ICONYX-R column loudspeaker. We hope you
enjoy it.

Your ICONYX-R steerable column loudspeaker was carefully tested and inspected before leaving our factory and should have arrived in
perfect condition. Please carefully inspect the shipping carton(s) and loudspeaker(s) for any noticeable damage, and if any damage is
found, immediately notify the shipping company. Only you, the consignee, may institute a claim with the carrier for any damage incurred
during shipping. Be sure to save the carton(s) and all packing material for the carrier’s inspection. It is also a good idea to save the carton
and packing material even though the loudspeaker arrived in good condition. If you should ever need to ship the loudspeaker, it should be
shipped in its original factory packaging.

TECHNICAL SUPPORT

If you have any questions about RHAON-Empowered Loudspeakers or encounter a problem designing, installing, setting up or operating a
RHAON system, please call our technical support staff at 949-588-9997 and ask the operator for technical support on RHAON. Call Mon-
day through Friday from 8:00 AM to 5:00 PM Pacific Time.

The latest information on RHAON Technical Support is always available online at http://www.renkus-heinz.com/support/software-
support/rhaon/e-mail.html. You will also find a support request form at http://www.renkus-heinz.com/support/request-info/tech-info/i

General Information

IC Live line array systems were developed specifically for live event productions. They are ideally suited for a wide range of event types
and sizes, are easy to transport and setup, and deliver superior sound in a broad spectrum of environments.

Thanks to digitally controlled beam steering they deliver narrow vertical beams of sonic energy that can be directed onto the audience in-
stead of reverberating off the walls and ceilings. Horizontal coverage is a consistent 150

o

eliminating the need for left and right setups in

most venues. Preset configurations for different size and shape venues reduce setup time to a minimum.

This guide was written to assist you in setting up and operating IC Live systems.

IC

L

ive Users Manual - Models ICL-R & IC215S-R

4

«
...
2
3
4
5
6
...
»

Summary of Contents for IC215S-R





































































Reviews:

No comments

Related manuals for IC215S-R

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 22

Brand: Panasonic Pages: 44

Sound Slayer SC-HTB01

Brand: Panasonic Pages: 12

Sound Slayer SC-HTB01

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 4

Brand: JBL Pages: 3

Brand: Panasonic Pages: 122

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands