IC
L
ive Users Manual - Models ICL-R & IC215S-R
19
Load Preset
The Load Preset control and its associated up/down arrows are used to select and install (load) a specific Preset into the array’s DSP
memory.
If no DSP data is not included in the Preset, a dialog box will call the lack of DSP data to your attention and ask if it is OK to proceed.
Answering Yes, will initiate the process, introduce a Loading Status screen and hide the lettering in the Beams / Presets window. The
Loading Status window will disappear and the lettering will reappear when the process is complete.
.
Controls
Most of the buttons at the bottom of the window provide additional control over Presets. We will cover them in detail in the next section of
this manual..
The Panel Controls, however, serve different functions. Clicking on the Panel Display control will turn the Preset digital readout display on
the rear of the array On and Off. The display is often turned off during a performance to prevent the readout’s red glow from being a dis-
traction. The button will say On in red when the readout is turned On.
The Panel Buttons control locks all the controls on the rear of the associated array to prevent inadvertent changing of the settings or tam-
pering. The padlock ion will be closed when the controls are locked.
SysTune Interface
If you are using SysTune as your measure-
ment system during setup and tuning, you
can access the array’s DSP from within Sys-
Tune.
This allows you to take a measurement, ad-
just the EQ settings and then view the result
of the changes in real time within one pro-
gram and on one screen - - no more jumping
back and forth between programs and win-
dows.