English 1/6
1. Overview
1. Instrument panel
2. Brake
3. Stem
4. Front interpolation
5. Front wheel
6. Light
7. Pedal crank arm
8. Saddle
9. Battery
10. Seat post clamp
11. Kickstand
2. Installation
2. Adjust the saddle height by opening the quick release seat post clamp. Lift the saddle up to an ideal height
and a suitable position. Lock the quick release seat post clamp.
Note:
An ideal height is provided when the knee is at a soft bend while sitting on the saddle and your foot placed on the pedal at its lowest point.
1. Installing the pedals:
• Note the left and right of the pedal.
• [L] left [R] right are stamped on the threaded end of the pedal.
• Attach the L pedal to the L crank, then R pedal to R crank.
• Screw the pedals in and tighten them fully.
Caution:
The L pedal has left-hand threads, and the R pedal has right-hand threads. Damages caused due to improper installation are not covered by the warranty.
L
R
IMPORTANT NOTES:
•
Always read the operating instructions attentively before first use. You will become familiar with your E-bike more quickly that way
and can avoid wrong operation leading to damage or accidents. Specifically follow the safety and danger notes.
•
The E-bike was delivered in the preinstalled condition. Before initial commissioning,it is therefore mandatory that the E-Bike be set,
adjusted and checked for tight fit of the components and screws.
1. Adjust the handlebar angle: release the angle-adjust screw, adjust the preffered angle and tighten the screw.
8
9
10
11
1
2
3
4
5
6
7
Summary of Contents for E-BIKE K9
