background image

1

How to install the 

unit on your bicycle

Setting up the 

computer

How to use the 

computer

Others

Changing the 

computer con-

figuration

Uploading the mea-

surement data

Setup of your 

PC

Introduction

Features of this unit

Measurement method

This unit is a cyclocomputer, having a GPS and acceleration sensor built-in, which can per-

form measurement by receiving GPS signal, without speed sensor.

Recording and viewing the trip route

Position information from GPS is recorded with measurement data during measurement. 

The measurement data such as your route and altitude can be viewed as a trip on a map on 

the site, by loading them into the dedicated software application “CATEYE Sync™” on your 

PC, and then uploading to the special website “CATEYE Atlas™”.

”CATEYE Atlas™” can be used as a database for your cycling life, where you can store the 

trips measured using this unit or CATEYE INOU, a trip recorder with camera.

  Before using the computer, please thoroughly read this manual 

and keep it for future reference.

* This PDF contains a link to YouTube. 

When you click on the button “Watch a video”, a message regarding secu-

rity appears. 

Click the “Allow” to open a browser and play the video.

* YouTube videos and instruction manuals related to this product are subject 

to change without notice.  

For the latest edition of the instruction manual (PDF), visit the official Cat-

Eye website.

* This manual has been prepared on the assumption that the user has suffi-

cient basic knowledge, including operation and terminology of PCs (Win-

dows / Mac).

CATEYE

STEALTH 10

CYCLOCOMPUTER CC-GL10

Instruction manual

ENG

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS 
standard(s). Operation is subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
L’appareil est conforme à la réglementation FCC, section 15 et Industrie Canada RSS standard 
exempts de licence (s). Son utilisation est soumise à deux conditions :
1. L’appareil ne doit pas provoquer d’interférences nuisibles, et
2. L’appareil doit supporter les interférences reçues, y compris les interférences empêchant son 
fonctionnement correct.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are 
not expressly approved by CatEye Co., Ltd. may void the user ’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following measures: 
Reorient or relocate the receiving antenna. Increase the separation between the equipment and 
receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected. Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

066601221  2

Summary of Contents for CC-GL10





























Reviews: