20
28. Wrap the High Cable (55) under a Pulley (48).
Attach the Pulley (48), a Cable Trap (50), and
two Half Guards (43) to the upper hole in the
U-bracket (45) with an M10 x 50mm Bolt (95)
and an M10 Locknut (56).
Make sure that the Cable Trap (50) is oriented
to hold the High Cable (55) in the groove of
the Pulley (48) and that the Half Guards (43)
are on the outside of the U-bracket (45).
30. Route the High Cable (55) over a Pulley (48) and
downward through the Top Frame (4).
Attach the Pulley (48) inside the Top Frame
(4) with an M10 x 68mm Bolt (71), two M10
Washers (57), two 13mm Spacers (52), and an
M10 Locknut (56).
29. Route the High Cable (55) upward through the
Top Frame (4) and over a Thin Pulley (47).
Attach the Thin Pulley (47) inside the Top Frame
(4) with the M10 x 68mm Bolt (71) used in step
27, a 10mm Spacer (61), an M10 Washer (57),
and an M10 Locknut (56).
28
29
30
95
50
56
43
55
47
71
71
4
61
57
56
55
52
52
48
57
4
57
56
43
45
48
55
Summary of Contents for PRO-FORM SPORT POWER STACK XT
Page 4: ...4 all STANDARD SERVICE PLANS...
Page 30: ...30 NOTES...