The Rear Panel: The Ins and the Outs
The DT-air is equipped with a balanced input connector providing connection
to a variety of audio devices like recording consoles, hard disk recorders,
CD players and computer audio interfaces, to name just a few.
Balanced XLR Audio Input
The DT-air features a female XLR connector that will accept a balanced
or unba4dBm line level signal. If you are using a mixer that
has balanced output on the XLR connector, you can make the connection
via standard XLR cable. (For an unbalanced signal, please refer to P.8
"cabling" for instructions regarding for the cabling for an unbalanced
connection )
1
5
Volume control
The volume control is used to adjust the overall output level of the DT-air
monitor system. When operating the unit for the first time, start with the
volume control turned right down. Slowly raise the volume control to
reach a comfortable listening level.
DT-air series
Active Studio Monitor System
Operating your DT-air Active Studio Monitor System
1
12
Summary of Contents for Definitor air Series
Page 18: ......
