background image

Introduction

What's in the package?

 

DT-5 air

 

/ DT-6 air or DT-8 air Active Studio Monitor System 

This users' Manual

Power Cable

TM

"Vasorb " monitor rubber feet x 4pcs. 

1

DT-air series

Active Studio Monitor System

Thank you for purchasing the ICON DT-air series active studio monitor system. We 
sincerely trust this product will provide years of satisfactory service, but if anything is not 
to your complete satisfaction, we will endeavor to make things right. 

In these pages, you'll find a detailed description of the features of the DT-air, 
step-by-step instructions for its setup and use, and full specifications.

Please

 

register

 

the

 

product

 

on

 

our

 

website

 

at

 

the

 

below

 

link

 

www.iconproaudio.

com/registration

:

 

You'll also find a warranty card enclosed---please don't forget to fill it out and mail it so 
that you can receive online technical support at: www.iconproaudio.com. And so we can 
send you updated information about these and other ICON products in the future. As 
with most electronic devices, we strongly recommend you retain the original packaging. 
In the unlikely event the product must be returned for servicing, the original packaging 
(or reasonable equivalent) is required.

With proper care , your DT-air will operate without any trouble for many years. We 
recommend that you record your serial number in the space provided below for future 
reference.

Summary of Contents for Definitor air Series



















Reviews: