1
2
3
4
8
6
7
5
Rear Panel Layout
1
2
3
4
7
8
5
6
Hi, Mid and Low range contour control
Adjusts the 3-settings (-2dB, 0dB, +2dB) of Hi, Midrange and Low response
providing customized adjustment for different acoustic environment.
Hi-Pass filter control
Adjusts the Hi-Pass filter from Flat, 60Hz & 80Hz
Volume control
Controls the output level
TM"
"AirCon
IP setting
Sets the unique IP address of your DT-air monitor system for the AirCon wireless
controller (You do not need to adjust this setting unless you have purchased the
ICON "AirCon" wireless controller and are creating wireless control for your studio
monitor system. Please refer to the AirCon manual for instructions on the setting)
XLR balanced input
Connects balanced, line level input via standard XLR cable.
(Please refer to P.8 for cabling)
Power Switch
Turns the unit on/off.
Voltage Selector
110V / 220V input voltage selector
AC inlet
Connects the supplied IEC power cable.
DT-air series
Active Studio Monitor System
5
Summary of Contents for Definitor air Series
Page 18: ......
