12
8
81
126
125
86
F
86
28
11
11
28
8. Attach a Handrail (86) to the Right Inner Upright
(126) with two 5/16" x 2 1/2" Screws (28) and
two 5/16" Star Washers (11) in the location
shown;
do not fully tighten the Screws yet.
Make sure not to pinch the Upright Wire (81).
Attach the other Handrail (86) to the Left
Inner Upright (125) in the same way.
Note:
There are no wires on the left side.
Then, remove and discard the indicated screws
(F).
F
9
9
28
28
5
5
93
9
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86) with
four #10 x 3/4" Screws (9) and four #10 Star
Washers (5);
start all four Screws, and then
tighten them.
Next, firmly tighten the four 5/16" x 2 1/2"
Screws (28).
86
86
