19
23
26
26
105
H
P
Start First
23. Press the two tabs (not shown) on the Tablet
Holder (105) into the slots (P) in the console
assembly (H).
Then, attach the Tablet Holder (105) to the
console assembly (H) with four M4 x 16mm
Machine Screws (26).
Tip: Start the two upper
Machine Screws
fi
rst, and then start the two
lower Machine Screws. Do not overtighten
the Machine Screws.
IMPORTANT: The Tablet Holder (105) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
25.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the
fl
oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 31). Note: Extra parts may be included.
24.
IMPORTANT: You must activate your Console
(80) to begin using its exclusive features.
First, plug in the power cord (see page 20) and
turn on the power (see page 22).
Then, using your smart phone or tablet, go to
iFit.com/activate
and follow the instructions to
activate the Console (80).
Note: If you do not have a smart phone or tablet,
use your computer to go to iFit.com/activate for
an alternate way to activate the Console (80). If
you do not have a computer, call Customer Care
(see the front cover of this manual).
24
80
