17
20.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 33). Note: Extra parts may be included.
19.
Firmly tighten the four 3/8" x 2 3/4" Screws
(23) and the four 3/8" x 1 1/4" Screws (20).
Next, slide the Left and Right Base Covers
(89, 90) down until they snap into place.
To register your product and activate your
warranty today, go to my.nordictrack.com.
90
89
23
23
23
20
20
19
18. Remove the 5/16" Nut (9) and the 5/16" x
2 1/4" Bolt (4) from the bracket on the Latch
Crossbar (109).
Align the upper end of the Storage Latch (56)
with the bracket on the Latch Crossbar (109),
and insert the 5/16" x 2 1/4" Bolt (4) through the
bracket and the Storage Latch.
This will push a
spacer (O) out of the Storage Latch; discard
the spacer.
Next, tighten the 5/16" Nut (9) onto the 5/16" x
2 1/4" Bolt (4).
Do not overtighten the Nut; the
Storage Latch (56) must be able to pivot.
Then, lower the Frame (52) (see HOW TO
LOWER THE TREADMILL FOR USE on page 31).
9
56
52
18
O
4
109
Summary of Contents for NTL19221.0
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 37: ...37 NOTES...
