16
93
56
3
9
N
17
17. Remove the 5/16" Nut (9) and the 5/16" x 1 3/4"
Bolt (3) from the bracket on the Base (93).
Next, orient the Storage Latch (56) as shown.
Attach the lower end of the Storage Latch (56)
to the bracket on the Base (93) with the 5/16" x
1 3/4" Bolt (3) and the 5/16" Nut (9).
Then, raise the Storage Latch (56) to a vertical
position and remove the tie (N).
52
109
L
8
8
16
16
16
M
M
16. Raise the Frame (52) to the upright position.
Have a second person hold the Frame until
step 18 is completed.
Remove the two 5/16" x 1 1/4" Screws (16) from
the Latch Crossbar (109).
Next, orient the Latch Crossbar (109) as shown.
Make sure that the “This side toward belt”
sticker (L) is facing the treadmill.
Attach the Latch Crossbar (109) to the brackets
(M) on the Frame (52) with the two 5/16" x 1 1/4"
Screws (16) and two 5/16" Star Washers (8).
Summary of Contents for NTL19221.0
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 37: ...37 NOTES...
