13
11
10.
IMPORTANT: To avoid damaging the Pulse
Crossbar (80), do not use power tools, and do
not overtighten the #10 x 3/4" Screws (6) or
the 5/16" x 2" Screws (2).
Orient the Pulse Crossbar (80) as shown. Attach
the Pulse Crossbar to the Handrails (74) with two
5/16" x 2" Screws (2), two 5/16" Star Washers
(8), and two #10 x 3/4" Screws (6);
start all four
Screws, and then tighten them.
Then, tighten the other two 5/16" x 2"
Screws (2).
80
10
8
8
2
2
2
2
6
6
74
74
H
83
K
J
74
11. With the help of a second person, hold the con-
sole assembly (H) near the Handrails (74).
Connect the Upright Wire (83) to the con-
sole wire (J).
The connectors should slide
together easily and snap into place.
If they do
not, turn one connector and try again.
Then, remove any wire ties (K) from the Upright
Wire (83).
Summary of Contents for NTL19221.0
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 37: ...37 NOTES...
