background image

26

HOW TO CHANGE CONSOLE SETTINGS

IMPORTANT: Some of the settings and features 
described may not be enabled.

 Occasionally, a 

firmware update may cause your console to function 
slightly differently. 

 1.  

Select the settings main menu.

 

 First, turn on the power and insert the key into the 
console (see HOW TO TURN ON THE POWER on 
page 20). Note: It may take a few moments for the 
console to be ready for use.

 

 Next, select the main menu. When you turn on the 
console, the main menu will appear on the screen 
after the console boots up. If you are in a workout, 
touch the screen, touch 

Pause

, touch 

End

, and 

then touch 

Finish

 to return to the main menu.

 

 Next, touch your name or 

Hello

 on the screen, and 

then touch 

Settings

. The settings menu will appear 

on the screen. 

 2.  

Navigate the settings menus and change 
settings as desired.

 

 Slide or flick the screen to scroll upward or down-
ward if necessary. To view a settings menu, simply 
touch the menu name. To exit a menu, touch the 
back button (arrow symbol). You may be able to 
view and change settings in the following settings 
menus:

 

 Account

 • 

 

My Profi le

 • 

 

In Workout

 • 

 

Manage Accounts

 Equipment
 • 

 

Equipment Info

 • 

 

Equipment Settings

 • 

 

Maintenance

 • 

 

Wi-Fi

 

 About

 • 

 

Legal

3.  

Customize the unit of measurement and other 
settings.

 

 To customize the unit of measurement, the time 
zone, or other settings, touch 

Equipment Settings

and then touch the desired settings. 

 

 The console can display speed and distance in 
either standard or metric units of measurement.

4.  

View machine information.

 

 Touch 

Equipment Info

, and then touch 

Machine 

Info

 to view information about your treadmill.

5.  

Update the console firmware.

 

 For the best results, regularly check for 
firmware updates. 

Touch 

Maintenance

, and then 

touch 

Update

 to check for firmware updates using 

your wireless network. The update will begin auto-
matically. 

IMPORTANT: To avoid damaging the 

console, do not turn off or unplug the treadmill 
while the firmware is being updated.

 

 The screen will show the progress of the update. 
When the update is complete, the treadmill will 
turn off and then turn back on. If it does not, use 
the power switch (see HOW TO TURN ON THE 
POWER on page 20) to turn the treadmill off, wait 
for a few seconds, and then turn it back on again. 
Note: It may take a few minutes for the console to 
be ready for use.

 

 Note: Occasionally, a firmware update may cause 
the console to function slightly differently. These 
updates are always designed to improve your 
exercise experience.

6.  

Calibrate the incline system of the treadmill.

 

 Touch 

Calibrate Incline,

 and then touch 

Begin

 

to calibrate the incline system. The treadmill will 
automatically rise to the maximum incline level, and 
then return to the starting position. This will cali-
brate the incline system. Touch 

Cancel

 to return to 

the Maintenance section. When the incline system 
is calibrated, touch 

Finish

.

 

 IMPORTANT: Keep pets, feet, and other objects 
away from the treadmill while the incline 
system is calibrating. In an emergency, pull 
the key from the console to stop the incline 
calibration.

7.  

Exit the settings main menu.

 

 If you are in a settings menu, touch the back arrow. 
Then, touch the close button (x symbol) to exit the 
settings main menu.

Summary of Contents for NTL19221.0













































Reviews: