![background image](http://html1.mh-extra.com/html/icom/uhf-ic-f60/uhf-ic-f60_instruction-manual_3870563032.webp)
23
4
BIIS OPERATION
■
Transmitting a call
Total of a 3 ways for code selection are available—selecting the
call code from memory, entering the call code from the keypad and
calling back from the queue channel record.
D
Using call memory
q
While in the standby condition, push [P1] (Digital) to enter the
call code memory channel selection mode.
Call code text is displayed.
w
Push [
]/[
] to select the desired call code.
e
Push [P0] (Call) or [PTT]* to call.
* PTT call can be made only when PTT call capability is permitted.
NOTE:
When no answer back is received, the transceiver re-
peats the call 3 times (default) automatically, and “
”
is
displayed during each call. However, an error beep sounds
and “
”
is displayed when no answer back is received
after the calls.
r
Push [PTT] to transmit; release to receive.
t
Push [P3] (Moni(Audi)) to send the “Clear down” signal.
Summary of Contents for UHF IC-F60
Page 66: ...MEMO...
Page 67: ...MEMO...